Arm Canes Crutches Manufacturer – Nonslip walking stick Cane – ZS

Basic parameters:

Height: 78-95.5CM 8 levels adjustable; base size: 18CM*26CM Net weight: 1.2KG;

The national standard GB/T 19545.4-2008 “Technical requirements and test methods for single-arm operation walking aids Part 4: Three-legged or multi-legged walking sticks” is used as the design and production implementation standard, and its structural characteristics are as follows:

2.1) Main frame: It is made of 6061F aluminum alloy + carbon steel, the diameter of the tube is 19MM, the wall thickness is 1.4MM, and the surface treatment is anodized. Adopting wing nut fastening design, non-slip teeth. Two-stage armrest design, with the function of assisting to get up;

2.2) Base: The welding spot of the chassis is reinforced to prevent slipping and shaking. The overall height can be adjusted in eight levels to suit people of different heights.

2.3) Grip: TPR grip is used to prevent slippage, feel comfortable and beautiful. The handle has a built-in steel column, which will never break.

2.4) Foot pads: 5MM thick rubber foot pads, there are iron pads inside the foot pads to prevent penetration of the foot pads, durable and non-slip. 

1.4 Usage and precautions:

1.4.1 How to use:

Adjust the height of the crutches according to different heights. Under normal circumstances, the height of the crutches should be adjusted to the position of the wrist after the human body is standing upright. The height of the crutches should be adjusted to twist the locking screw, press the marbles, and pull the lower bracket to adjust to the appropriate position to ensure the elasticity. The bead is completely ejected out of the hole, and then tighten the knob screw.

When assisting to get up, hold the middle grip with one hand and the upper grip with the other hand. After holding the grip, stand up slowly. When in use, a person stands on the side with a large corner of the base of the crutches.

1.4.2 Matters needing attention:

Check all parts carefully before use. If any low-end wearing parts are found to be abnormal, please replace them in time. Before use, make sure that the adjustment key is adjusted in place, that is, you can use it only after you hear a “click”. Do not place the product in a high temperature or low temperature environment, otherwise it will cause aging of the rubber parts and insufficient elasticity. This product should be placed in a dry, ventilated, stable, and non-corrosive room. Regularly check whether the product is in good condition every week.

When using, pay attention to the wires on the ground, the liquid on the floor, the slippery carpet, the stairs up and down, the gate at the door, the gap in the floor