High-Quality Medical Canes Walking Sticks Supplier – Movable aluminium structure wheelchair commode chair for disabled people – ZS

Basic parameters:

Total height: 83-88cm, total length: 86cm, total width: 54cm, sitting height: 46-51cm, sitting width: 44cm. Sitting depth: 42cm, armrest height: 19cm, backrest height: 39cm,

According to the GB/T24434-2009 “Commode Chair (stool)” national standard as the executive standard, its structure is as follows:

2.1) Main frame: The main frame is composed of 6061F high-strength aluminum alloy, the diameter of the tube is 22.2cm, the thickness of the tube is 1.2cm, and the surface treatment is anodized bright surface, beautiful and generous, good waterproof performance, dual use for shower and toilet, two A weighing bar is added on the side, which greatly improves the weighing effect.

2.2) Seat board: The seat board adopts a seamlessly stitched all-leather open U-row seat board, which has high comfort and good waterproof performance. The seat board can be turned up and is convenient to lift the toilet.

2.3) Wheels: 4-inch PVC 360-degree rotating small wheels are used, the rear two wheels have self-locking brakes, the overall height is adjustable in 3 levels, safe, quiet, and durable.

2.4) Pedal: The pedal is made of all aluminum alloy welding, which can be disassembled and turned up. The front part of the pedal is equipped with ground support feet to prevent people from stepping on the chair. The height of the support feet can be adjusted in 2 levels.

2.5) Backrest armrest: The backrest can be disassembled and has a push handle. The backrest is made of PE blow-molded board. The surface of the board has anti-skid patterns and good waterproof effect. The armrests are made of PE blow-molded, with anti-skid patterns on the surface. , Safe and durable.

FAQ：

1.What is your delivery port?

Any Chinese Main Port is ok.but the nearest port is Qingdao Port.

2.What is your warranty time?

Our warranty time for common product is 2 years.Any question about the quality,we promise to send new product for replacement.